PRODUCT SPECIFICATIONS
Brand
Dr. Fixit
Temperature                                                
Application: 5 to 55 deg C
Service: -5 to 75 deg C
Applications
Providing Damp Proofing for Below Ground Concrete Structures, Which are Above the Water Table.
The Coating is Also Used as a Moisture Vapor Barrier on Block Works & Concrete Surfaces Prior to Cladding.
This Can Also be Used as the Protective Coating for Built-Up Roofing Systems Along with Fabric
Volume
20 Ltrs
Shelf Life
The Drums & Pails must be Stored in a Covered Area, Away from Direct Sunlight, UV & Other Sources of Heat.
The Shelf Life is Upto 12 Months, When Stored as per Recommendations.
Excessive Exposure to Sunlight, UV & Other Sources of Heat will Result in Considerable Deterioration of the Product & Reduce its Shelf Life.
Coverage Area
When Applied at 4m²/L/coat, the Dry Film Thickness Achieved will be 125 microns.
Further Coats shall be Applied only After the Previous Coat Dries Off Completely.
Precautions
Do not Apply Dr. Fixit Bitufix Directly in Open Sunlight, When Temperature is Higher than 55 deg C.
The Coating shall be Protected from on Going Site Activities & During Back Filling from Getting Damaged by a 150 micron Polyethylene Sheet.
Protective Clothing Such as Gloves & Goggles should be Worn, When Handling the Product.
Treat any Splashes to the Skin or Eyes with Fresh Water Immediately.
Should any of the Products be Accidental Swallowed, Do not Induce Vomiting, But Call for Medical Assistance Immediately.
Ensure that the Container is Available for Medical Attendant to Examine any Relevant Instructions & Content Details.
Density
1.02 ±2 g/cc
Appearance
Thick -Viscous Liquid
Item Code
196
Colour
Dark Brown